Refurbishing kitchen cabinets can be done by you. You do not need the services of professional furnishers to repair the kitchen cabinet. If the kitchen cabinet does not suffer severe damage, then you can repair the cabinet at home. Kitchen cabinets are used for storing groceries, cooking utensils, and so forth.
Cabinet has an important role for a kitchen. All kitchens must have a cabinet for storage. You definitely do not want to see your kitchen dirty and all the equipment is on the kitchen table. Kitchen cabinets are the solution for you. Usually, you can buy this cabinet at the furniture store. You can choose the kitchen cabinet design to your liking. If your cabinet door is damaged, then you can see how the fix is below.
Material and Equipment
You need a multiplex that has a thickness of 15 mm. You also need melamine with a thickness of 3 mm. You should buy a sheet of HPL that has the same motif as the cabinet door from your kitchen. You will definitely need glue to stick melamine with HPL.
Both of these materials must be affixed to the surface of the multiplex. You must tightly bond the two components together. You need a drill machine to make the screw fast. You must have an iron ruler to measure your cabinet. A screwdriver is used to remove screws.
The first thing you should do is remove the cabinet door from your kitchen. You must remove all the hinges that lock the door. You should use a screwdriver to unlock all the seals. The next step is to cut melamine and multiplex according to the size of the cabinet door. You should use a ruler to find the exact size of your kitchen cabinet door. You should attach melamine to the surface of the multiplex.
You should use glue specially made to stick the wood to make it strong. You should not take the next step until the component has been perfectly attached. You have to wait for the glue to dry and blend perfectly. HPL should be cut in accordance with the cabinet door. You can make the size 2 cm larger than the usual size to facilitate the cutting.
You can attach the HPL to the multiplex section. You may only attach this component to one side of the material. You can use glue fox twice so that both of these materials will stick in a fast time. If you have seen that these two components are firmly attached, then you can cut the HPL with an elbow rule. You should use a ruler made of iron to make the pieces look neat. Paste this component in white. You must tidy the corners of the HPL to make it look smoother.
The drill is used to create holes on the edge of the component. You need the hole to install the hinge. You also have to make sure that the hinge has a location that matches the size of the cabinet door so that the door will appear neat and nice. You should attach the screws with the drill machine so that the hinges will not be separated from the door. You can check the cabinet door by closing and opening the door. The final step is to install the door handle. That’s a simple way for refurbishing kitchen cabinets.